Bearing NNU49/560MAW33 NNU4934MAW33

Number of Raceway Ring Rows:Single Row; Specifications/Environment:Standard; Size Standards:Inch Base; Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Cone roller bearing large-capacity type (symbol: 4T-orU):4T; Specifications/Environment:Standard; d:34.925; Raceway Ring Shape:Tapered Roller; Revolution Frequency(rpm):5700;

ra max:1 mm; Static load, C0:17.8 kN; Fatigue limit load, Cu:0.81 kN; Characteristic rolling element frequency, BSF:4.84 Hz; Mass:0.37 kg; B:18 mm; d:40 mm; D:80 mm; rs min:1.1 mm; Dynamic load, C:29.1 kN;

Stroke:No; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Triple seals; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Round flange shape; Unit Body Material:Cast Iron; Fit:J7; Surface Treatment:No; Fit:J7;

Z:46.2 mm; A2:41.5 mm; Dz:54 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of open end cover:SCOE204-15; J:90 mm; L:60 mm; d1:32.4 mm; Designation of housing:FL204N-; T max.:100 °C;

ra max:1 mm; Static load, C0:17.8 kN; Fatigue limit load, Cu:0.81 kN; Characteristic rolling element frequency, BSF:4.84 Hz; Mass:0.37 kg; B:18 mm; d:40 mm; D:80 mm; rs min:1.1 mm; Dynamic load, C:29.1 kN;

ra max:1 mm; Static load, C0:17.8 kN; Fatigue limit load, Cu:0.81 kN; Characteristic rolling element frequency, BSF:4.84 Hz; Mass:0.37 kg; B:18 mm; d:40 mm; D:80 mm; rs min:1.1 mm; Dynamic load, C:29.1 kN;

Height H(mm):25 ～ 35; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Type:Bearings with Housin; RoHS:6; Bearing I.D. d(mm):12; Bearing Part Number:6201; Lateral Width L(mm):40;

Stroke:No; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Triple seals; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Round flange shape; Unit Body Material:Cast Iron; Fit:J7; Surface Treatment:No; Fit:J7;

Height H(mm):25 ～ 35; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Type:Bearings with Housin; RoHS:6; Bearing I.D. d(mm):12; Bearing Part Number:6201; Lateral Width L(mm):40;

s1:24.6 mm; G:M6x1; Z:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; C:31.85 kN; N:16mm; Weight:2.08 kg; T min.:-20 °C; Designation of housing:F209N-; d:45 mm;

Height H(mm):25 ～ 35; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Type:Bearings with Housin; RoHS:6; Bearing I.D. d(mm):12; Bearing Part Number:6201; Lateral Width L(mm):40;

Number of Raceway Ring Rows:Single Row; Specifications/Environment:Standard; Size Standards:Inch Base; Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Cone roller bearing large-capacity type (symbol: 4T-orU):4T; Specifications/Environment:Standard; d:34.925; Raceway Ring Shape:Tapered Roller; Revolution Frequency(rpm):5700;

I.D. d(φ):25; Material:Low Carbon Steel; O.D. D(φ):29; Application:For Inner Ring; RoHS:6; Surface Treatment:Electroless Nickel P; L(mm):2 ～ 100; Application:For Inner Ring; Days to Ship:7 Days; L Dimension Tolerance:Positive Tolerance;

s1:24.6 mm; G:M6x1; Z:33.4 mm; Recommended tightening torque for set screw:11.5 Nm; C:31.85 kN; N:16mm; Weight:2.08 kg; T min.:-20 °C; Designation of housing:F209N-; d:45 mm;

d:49.21 mm; S:10.9 mm; Weight:3 kg; H2:114 mm; N1:25 mm; B:43.5 mm; G:M6x1; H1:22 mm; C:35.1 kN; N:20mm;